Tips On How To Extend Smok Pen Recharge Time
The Smok Pen is really a new pen that was created by two guys in California. They wanted to create a cool writing instrument that looked like a genuine pen but had the opportunity to smoke a hookah. They named their product the Smok Valve and the Smok Pen. The Smok Valve has taken the market by storm.
The Smok Pen includes a built quality that is just great. I found that even though it is an electronic pen the construction is simply as good as the pens that I’ve reviewed. For the reason that of how they made the very best cap. You don’t need to be worried about the cap cracking or breaking on you Smok Valve Pen.
The two biggest differences that separate the Smok Valve from other pens may be the form of the coils and just how that they are built. Generally the coil on a Smok Pen is larger than on other pens. I believe that they did this on purpose, to help make the pen feel bigger.
If you take a look at a Smok Pen, you will observe that your body of the pen is round and not smooth like other pens. On the back of the pen there is a little tab that houses the coil. Once you press on the tab you can easily turn the heating element on and off. I must say i liked this feature because it allows me to utilize the JUUL Pods Smok Pen 22 whenever Personally i think like smoking.
To use the Smok Pen you need to keep carefully the heat button pressed. After the button is pressed, the heating element will start to warm up. Once it reaches the appropriate temperature it is possible to switch off the heating element. Smok recommends using a 22mm tank. I prefer a larger tank, but that’s just me.
When you put your Smok Pen into the tank you will notice a indicator light come on. The indicator light will remain green if you don’t put your Smok Pen into the Smok Pen charger. Once your Smok Pen has entered the charger the indicator light will turn red. It is very important always put your pen into the charger before you apply the e-liquids to the coil heads. It is also important to do this before putting your e-liquids into the coil heads.
After you have completed this step, you should always check to see in case you are at the proper temperature for the coils to fire. If not then you should turn the power off and try again. Should you be still not satisfied together with your Smok Pen then I suggest you take it set for some troubleshooting. This is what I’d call the “troubleshooting process” because sometimes things just do not work as they should. I would recommend that you perform the following two steps, then go on and check the Smok Pen to see if it still has the electronic charging port.
Before you go any further you should take away the battery from your own pen and unscrew the magnetic cap. You should then take away the plastic sleeve that holds the sub-ohm. There is a wire that runs through the Smok’s body which is green in color. You need to loosen this wire using pliers. After you have loosened this wire you can then access the sub-ohm. You should then remove the wire from the Smok’s body and carefully insert it into the Smok pen’s electrical port, being careful never to touch the coils.
Once you have placed the sub-ohm tank in to the pen you should then place the rest of the components including the wattage, the batteries and the heating element into the included microwaveable microwave oven. Turn on the power and follow the on screen instructions. You need to place the pen’s battery into the microwave and activate the setting. You need to then wait approximately 30 seconds before turning it cool off. When you first put the pen in to the microwave the electronic reading will show a minimal voltage protection setting. If this setting will not automatically get set then you should follow the on screen instructions.
After the Smok Pen has already reached the temperature that it requires to reach you need to then connect both wires to the positive and negative on the positive post on the Smok unit. You should then connect the other end of the battery to the negative post on the negative side of the Smok unit. The final step would be to connect the positive cable to the bottom of the Smok’s on / off switch.
After all the components have been placed in to the pen, you should turn the energy on. After the first test run, you should be able to see the battery life indicator light come on. If you do not see any sign of life from the Smok Pen, you need to remove the battery from the pen and replace it with a brand new one. For your convenience gleam green light that could be pressed in order to confirm the battery charging status. Once you have done these things and you also do not start to see the green light indicating charging, you need to replace the battery.